14 strokes to deal with the broken thread of the embroidery machine
As we all know, embroidery machine thread breakage is relatively common. Although it is the same fault, it may be caused by different fault reasons. The following is an analysis of the 14 different causes of embroidery machine thread breakage (the former is the cause of the fault; the latter is Troubleshooting methods).
Sakura Brand Embroidery Thread, Computer Embroidery Thread, Embroidery Thread
As we all know, the broken thread of the embroidery machine is relatively common. Although it is the same fault, it may be caused by different fault reasons.
The following is an analysis of the 14 different reasons that cause the embroidery machine to break (the former is the cause of the fault; the latter is the troubleshooting method):
1. The tension of the bottom thread is too high; the solution: reasonably adjust the tension between the pressure plate and the shuttle skin to be even.
2. The needle hole of the machine is cut off quickly; solution: change the needle.
3. The thickness of the needle does not match the embroidery thread; treatment method: select the model of the needle with the appropriate thickness according to the thickness of the embroidery thread.
4. Hair on the hook tip of the hook; treatment method: use sandpaper or oil stone to polish the hook tip of the hook or change the hook.
5. The upper thread is not lubricated; treatment method: apply silicone oil to lubricate the upper thread.
6. The thread is blocked by the hair of the shuttle; treatment method: sanding or polishing the hair.
7. The thread take-up rod hole is hairy; treatment method: smooth the thread take-up rod hole with sand leather.
8. The hook hole of the three eyeliner is hairy; treatment method: smooth the hook hole of the three eyeliner with sand leather.
9. The needle plate holes are hairy; treatment method: smooth the needle plate holes with sand leather.
10. The plywood and the plywood screws are hairy; treatment method: smooth the plywood and the plywood screws with sand leather.
11. The positioning hook is hairy; treatment method: smooth the positioning hook with sand leather.
12. The gap between the positioning hook and the shuttle frame is unreasonable; solution: adjust the gap between the positioning hook and the shuttle frame in a standard manner according to the operating instructions until it is suitable.
13. The tensioner of the upper thread tensioner fails to clamp the thread; solution: regularly remove the rubbish in the tensioner of the upper thread.
14. The direction of the needle groove is not correct; treatment method: scientifically adjust the direction of the needle groove, so that the captain groove is aligned with the operator.
If you need good quality embroidery thread, go to Hangzhou Sakura Thread Industry Co., Ltd. We are serious and professional in making embroidery thread. Hangzhou Sakura Thread Industry Co., Ltd., founded in 1992, covers an area of more than 100 mu. It is a wholly foreign-owned enterprise with a history of more than 20 years of thread production.
